M2500G Series Divider
Specifications
Material: Steel (zinc-nickel plated)
Operating Pressure (max): 400 bar
Discharge per cycle: 0.08 – 1.31 cc
No. of outlets: Up to 20
Lubricants: SAE 10 oil to NLGI #2 grease
Application
2500G Series Divider Valve Manifolds are the principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing.
Progressive movement lubricant divider blocks operate in a pre-arranged sequence for easy monitoring of system operation through a moving indicator pin. Normally, the pin transmits a signal to the system controller through an electrical limit switch at the end of a complete lubrication cycle.
Up to 20 bearings can be lubricated from one manifold assembly, and up to 20 manifolds can be included in a simple system. Cyclic discharge from a lubricator forces sequential movement of the pistons inside the divider block, which displaces fixed volumetric amounts of lubricant to each point connected to the system network
Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!