Bijur Delimon PE4 Distributor

PE4 Distributor

Specifications

Material: Steel

Max Pressure: 160 bar

Discharge volume: 0.4 cc / stroke

No. of outlets: 2 - 4              

Lubricants: all grease having a consistency of up to penetration class 3 and all oils having a viscosity of 190 mm2/s at service temperature (approx. 20° C)

Application

Positive dividers type E4 are employed for progressive centralized lubrication systems. The grease or oil fed into them under pressure is distributed to various lubrication points or slave dividers. If required, the dividers can also be installed in oil circulating, single, dual or multi-line systems to divide the lubricant in a supply line and feed it to several lubrication points.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for Delimon PE4 Distributor

Bijur Delimon PVB Distributor

PVB Distributor

Specifications

Material: Steel

Max operating pressure: 160 bar (with motion indicator)

300 bar (pressure-resist, without motion indicator)

Discharge per cycle: 0.20 cc

No. of outlets: 6 - 20

Lubricants: Grease up to NLGI No. 2, oil grades from ISO VG 68 to 1,500

Application

The PVB Divider Valve is designed for small-size series progressive lubrication systems. It is a cost efficient solution that can accurately meter and dispense lubricant to as many as 20 outlet lines at operating pressures up to 3600 psi (248 bar). For use with machine tools, processing machinery, presses, textile, printing and packaging machinery.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for Delimon PVB Distributor

Bijur Delimon FL 32/33 Grease Injectors

FL32/33 Grease Injectors

Specifications

Material: Galvanised carbon steel

Operating Pressure: 82 - 230 bar

Discharge per cycle: 0.016 – 0.131 cc(FL32)

0.016 – 0.049 cc (FL33)

No. of outlets: 1 to 6

Lubricants: Grease up to NLGI No. 2

Application

The series of FL 30 injectors are perfectly adapted to lubricate all types of machines with a cyclic sequence. Discharge of each injector is adjustable yet delivers a precise amount of lubricant. A visual indicator pin built into each injector makes it easy to confirm a discharge at any lubrication point.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for Delimon FL32/33 Grease Injectors

Bijur Delimon 3000 Series Divider

3000 Series Divider

Specifications

Material: Steel (zinc plated)

Operating Pressure: 20 - 207 bar

Discharge per cycle: 0.41 – 4.92 cc

No. of outlets: Up to 20        

Lubricants: Oil, Grease up to NLGI No. 2

Application

The Series 3000 progressive divider valve manifold distributes and proportions incoming oil or grease to bearing points. A typical divider valve manifold consists of an inlet section, three to ten valves and an end section. One assembly can serve up to a maximum of 20 lubrication points. Location of valve blocks within the manifold is not critical – however, it is recommended that the largest block be located next to the inlet block.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download data sheet for 3000 Series Divider

Bijur Delimon M2500G Series Divider

M2500G Series Divider

Specifications

Material: Steel (zinc-nickel plated)

Operating Pressure (max): 400 bar

Discharge per cycle: 0.08 – 1.31 cc

No. of outlets: Up to 20        

Lubricants: SAE 10 oil to NLGI #2 grease

Application

2500G Series Divider Valve Manifolds are the principal components of a progressive lubricating system. Modular construction makes these blocks easy to install, modify and maintain, without removing any tubing. 

Progressive movement lubricant divider blocks operate in a pre-arranged sequence for easy monitoring of system operation through a moving indicator pin. Normally, the pin transmits a signal to the system controller through an electrical limit switch at the end of a complete lubrication cycle.

Up to 20 bearings can be lubricated from one manifold assembly, and up to 20 manifolds can be included in a simple system. Cyclic discharge from a lubricator forces sequential movement of the pistons inside the divider block, which displaces fixed volumetric amounts of lubricant to each point connected to the system network

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for M2500G Series Divider

Bijur Delimon ZP-B Distributor

ZP-B Distributor

Specifications

Operating Pressure (max): 300 bar

Metering Volume: 0.5, 1.2 or 2.0 cc

Flow volume: min. 0.5 cc/min;

max. 1500, 3000, 5000 cc/min

No. of outlets: Up to 24                  

Lubricants: Oil, grease, liquid grease

Application

Distributors ZP-B are used to divide and meter lubricant in total loss central lubrication systems (oil, liquid grease and grease) and in oil recirculation systems suitable for small, medium and large machine plants.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for ZP-B Distributor

Bijur Delimon ZP6000 Pump

ZP6000 Pump

Specifications

Operating Pressure (max): 160 bar

Number of outlets (max): 32

Rate of delivery per outlet: 0 - 0.20 cc/stroke

Delivery rate (cc/min): 1.69, 0.84, 0.60, 1.12

Step-down ratio: 150:1, 300:1, 450:1, 225:1

Max RPM: 12/min                

Motor power: 0.37kW

Reservoir volume: 10, 20, 30, 60 litres

NLGI Class: 000 - 3

Application

The pump ZP6000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for ZP6000 Pump

Bijur Delimon ZP4000 Pump

ZP4000 Pump

Specifications

Operating Pressure (max): 160 bar

Number of outlets (max): 8

Rate of delivery per outlet: 0 - 0.20 cc/stroke

Delivery rate (cc/min): 1.69, 0.84, 0.60

Step-down ratio: 150:1, 300:1, 420:1

Max RPM: 12/min

Motor power: 0.18kW

Reservoir volume: 5, 10 litres

NLGI Class: 000 - 3

Application

The pump ZP4000 in various design versions are used for direct lubrication in multi-line systems (one delivery element per lubricating point) or as delivery pump for lubricant in progressive systems.

Mc-Cast Engineering Co. Ltd. provides consultation services to ensure the best fit for your systems. Contact us for more information!

Download datasheet for ZP4000 Pump